Transmitter
Warranty
All products purchased through Dive Rite Mexico are backed by the branded manufacturer limited warranty.
The Shearwater Research HP Wireless Transmitter screws in to the high pressure (HP) port of a first stage regulator and can communicate with the air integrated dive computer to allow them to display the cylinder gas pressure without the use of the typical HP hose.
This Shearwater Research tank pressure wireless transmitter (OEM by Pelagic Pressure Systems), is compatible only with those specific models of Shearwater Research, Hollis, Oceanic, and Aeris brand dive computers that support hoseless air integration. This includes both the Shearwater Perdix AI and NERD 2 models, plus the Hollis DG03 model.
The transmitter is rated for depth up to 150 m (500 ft), and has a user replaceable, widely available, 3V CR2 Lithium photo battery. Each transmitter has its own unique ID and multiple transmitters can be linked to compatible dive computers (up to two for the Shearwater).
Shearwater Research supplies the transmitter with a small zippered hard case. The Shearwater case included with the transmitter is a very snug fit, suitable for dry storage, but not suitable for boat use or damp storage.
An antenna inside the dive computer receives the signals when it is positioned within 1.8 m (6 ft) of the transmitter and within a zone parallel or at a 45 degree angle to the transmitter. Best reception is achieved when the dive computer and transmitter are within 0.9 m (3 ft) of each other. During a dive you may at times move the dive computer so that is out of the signal pattern of the transmitter, resulting in a temporary interruption of the link. The link may also be interrupted if the dive computer is within 0.9 m (3 ft) of a running DPV, or after a strobe light flashes. The link will be restored within 4 seconds after the dive computer is reoriented, moved back into range, or the interference clears. For technical diving.
In rare cases, the body of some first stage regulator designs will have hose ports oriented such there is not room to accept a wireless tank pressure transmitter without interfering with hose routing. The solution is to use a standoff adapter, or some divers prefer to use a short 15 cm (6 inch) HP hose pigtail (do not forget the required Air Spool) in place of the standoff.
Shearwater Research HP Wireless Transmitter Features
Compatible with Shearwater Perdix AI dive computer
Wireless transmission of tank pressure to your dive computer
Rated for depth up to 150 m (500 ft)
Includes user replaceable 3V CR2 Lithium photo battery
Shearwater Research HP Wireless Transmitter Specifications
Battery Type (user replaceable): 3V CR2 Lithium
Battery Life: 300 Hours
Depth Rating: 152 m (500 ft)
Wireless Mode: Low Frequency RF 38kHz